You may choose to restrict the collection or use of your personal information in the following ways: Plus points: the build quality is good and the case with built-in charger is fantastic. Using 5Ghz frequency range is a big positive over using the very crowded 2.4Ghz range. We require this information to understand your needs and provide you with a better service, and in particular for the following reasons: Note: B-7PSM is designed for band rehearsals and live performances, prioritizing the best possible STEREO experience. You'll enjoy the product and the experience it provides, while it may not be suitable for personal silent practice. Caution: Do not put the in-ear buds in your ears before you start to adjust the volume, it may hurt your ears if the volume is too loud.

Note: For best results the TX should be at least 1 meter above the ground, 2 meters away from Wi-Fi routers and wall or metal surfaces to minimize reflections.

Note: When coupling multiple B-7PSM systems, please turn on 1 set first, pair it, and then turn on the other sets sequentially. Note:When coupling multiple B-7PSM systems, please turn on 1 set first, pair it, and then turn on the other sets sequentially. Caution:Do not put the in-ear buds in your ears before you start to adjust the volume, it may hurt your ears if the volume is too loud. Note: We recommend you use headphones or in-ear buds with a 16~32 Ω impedance for the best experience. While the B-7PSM is a STEREO IEM solution, you can use it in a mono environment as well if needed. Simply use a 1/4" MONO to 1/8" STEREO adapter (to split the mono signal from a 1/4" Output into both channels of B-7PSM's 1/8" Stereo Input), then you can get a mono signal that can be heard in both the left and right channels.

Looking for a hassle-free way to monitor your performance on stage or on air? Look no further than the B-7PSM wireless personal monitoring system!From any position. On any stage. Hear every note in detail with NUX B-7PSM in-ear monitoring system. Note: We recommend you use headphones or in-ear buds with a 16~32 Ω impedance for the best experience. You can charge the RX and TX units with the rechargeable storage case, or by using the USB-C cable to charge. Both units can work while charging just in case.ort press the power button of the RX to return to the default volume setting. It may be too loud if the in-ear buds are very sensitive. Please turn down the mixer’s volume and increase it carefully.

Simply plug the transmitter in to your monitor or headphone output on your mixer to enjoy a wire free, digital quality monitor mix from the included clip on receiver. Plug in the TX to a live or personal mixer and turn on the TX (LED indicator will show GREEN.) Then connect your in-ear buds with the RX, turn on the RX to pair with the TX. The LED indicator will be solid GREEN. Now it’s ready to go. This powerful system is designed to drive any stereo in-ear monitors or headphones with an impedance of 16-32 Ohms, providing reliable and accurate monitoring with freedom of movement for musicians, stage performers, and broadcasters. Caution: Do not put the in-ear buds in your ears before you start to adjust the volume, it may hurt your ears if the volume is too loud.The NUX B-7PSM is a wireless personal in-ear monitor system with automatic RF environment scan, 5.8GHz interference-free broadcasting frequency, and 24-bit / 40 kHz high-quality STEREO audio transmitting. From any position. On any stage. Hear every note in detail with NUX B-7PSM in-ear monitoring system. Note: When coupling multiple B-7PSM systems, please turn on 1 set first, pair it, and then turn on the other sets sequentially. Note:For best results the TX should be at least 1 meter above the ground, 2 meters away from Wi-Fi routers and wall or metal surfaces to minimize reflections.