The supplied adapters allow you to attach the set to different lenses and the angle of view and tilt can be adjusted by using the view angle adjustment ring on the barrel. Dedicated film holders for both film strips and mounted slides2 are included, as well, to help hold the film taut and to benefit handling. Besides that, the set is particularly well-suited for the NIK. D850 camera due to its dedicated Negative Digitizer mode and ability to automatically reverse colors in-camera to expedite the digitizing process. Additionally, you can use the set together with the included LED Light3 to get high quality light source and improve image sharpness.

It can be used to photograph 35mm film and is compatible with the following select CAN., NIK., SON., Laowa and OLY. lenses 1: This change of mind return policy is in addition to, and does not affect your rights under the Australian Consumer Law including any rights you may have in respect of faulty items. I did do that with one Kodachrome slide, a window lit portrait which was half in shadow. I could lift the shadow up to almost the same brightness as the lit side, but you could tell from the “grain” that it was not quite right. That was probably an extreme example though - I have kept the scan but not brightened up all the way.

Compare Similar Products to JJC 35mm Film Negative Scanner,Film Digitizing Adapter with LED Light Set,Slide&Film Holder for Negative Copying.Restore Film...

When using an incandescent light source, keep the diffuser screen at least 30cm (1 ft.) from the bulb. If the adapter is placed too close to an incandescent bulb or left too long in its vicinity, the heat may damage the film or deform the holder.

Complete Accessories】The Slide scanner set supplied 1x barrel, 8x adapters 1x 35mm film holder(Negative holder), 1x 35mm Slide holder(Positive holder), 1x LED Light with 42 beads and Photos- Works Standalone, No Computer/other camera accessories,film scanner required. JJC 35mm Film Negative Scanner,Film Digitizing Adapter with LED Light Set,Slide&Film Holder for Negative Copying.Restore Film to Digital Photos,Film and Slide Scanner Accessories Slide & Film Remake】Specially designed for negative copying and converts film to digital files. Compatible with micro lenses and can be used to photograph 35mm film. The tolerance of the sliding carriers in the film housing is not ideal. There's room for some slight tilting. I fixed this by adding bits of thin, dense foam to the slot in the film holder where the carriers sit. That eliminates any play and keeps the carriers level. That is almost true for me, although I can sometimes get what are slightly better results using a 24mp camera than I get with my film scanner.

Highest Rated in Camera Flash Adapters

I was going to cut that tube to a better length, but the easy solution is to instead substitute one of the #2 tubes (there are two of those in the kit), which are shorter. The other #2 tube remains available as an extension for use with my APS-C camera if I need to shoot with that for some reason. I believe the combination of two #2 tubes would only be needed with macro lenses longer than about 80mm, so that's not an issue for me.