Your here because you found in the flow chart that your exploit method is the R-JTAG method (dash higher than 7371 but less than 15572 if you have a phat, and console is a phat or slim) Cannot run Xecuter Fusion (a custom NAND that is a hybrid of a dev NAND and retail NAND, but there are alternatives)

Now extract the folder and copy the "Compatibility" folder to the HDDX:\ folder on your Xbox overwriting anything that is already there.There is a POST QSB for Trinitys (a 2nd QSB that goes on the bottom) but it doesn't really make a big difference so I will not talk about it Changed the "Creating ECC" step so that it only needed J-Runner and no manually addition of the ECCs since J-Runner was updated and now has then included Slim) Squirt Reloaded 2.X: remove R2 and connect STBY_CLK or remove 100 MHz and add 48 MHz oscillator Optional) An ethernet cable is plugged into the Xbox 360 and a LAN (e.g. a switch, router, or directly to a PC)

Plug a flash drive into your Xbox 360 and navigate to Console Settings > Storage. Select the flash drive and allow the console to format the flash drive. Connect Ethernet and power on the console. The glitch chip should blink once or more times, and then the console should start into XeLL RELOADED. While doing an RGH 1.2 on a Jasper 16MB with a Coolrunner Rev C clone, I've encountered a RROD with error code 0022. Here's my timeline of events: I followed this guide.

Navigation menu

The next thing that you will need is a glitch board, sometimes also called glitch chip or RGH chip. Spoilers are nice but I want this to be a mostly full in-depth guide that isn't cluttered so I kept the spoilers as low as I could. I have the ones I have to keep clean, so expand the sections that only apply to you. Added info for the RGH1 wiring method for those eligible (since the boot times are faster), and added info about the Demon BB Conversion Kit. Glitch Chip Diagrams Phat CoolRunner rev C/D CoolRunner 3 Lite Matrix Glitcher Slim & E CoolRunner Rev C & CR3 Lite (Trinity) CoolRunner Rev C & CR3 Lite (Corona without Postfix) CoolRunner Rev C & CR3 Lite (Corona with Postfix) DGX v1.0S Programming the Glitch Chip When I power up the console, the green light on the Coolrunner does not light up (sometimes it lights up faintly, but rarely), the fans don't sound like they're glitching, the green light on the front of the console blinks constantly and it never boots