Neewer microphones are mostly condenser microphones. This means that they have many components that need a lot of power to work; thus, you have to connect them to an external power source.

For instance, if you are doing a podcast, you need your fans to hear you clearly, so you cannot afford to have a lot of reverb. Thankfully though, Neewer are onto of this and has taken the time to add a tiny metal slit to prevent this issue from happening with the Neewer nw700. This minimizes the chance of the microphone being damaged due to user error and further extends the expected lifetime of the mic to allow you to keep using it time and time again. Our Verdict Both microphones are very top-heavy, with a lot of presence in the upper mids. This is going to result in a very bright, hyped sound, which might suit some modern performances but also opens up potential issues with regard to sibilance and unnecessary hisses. To summarize our findings in this Neewer NW 700 vs Neewer NW 800 comparison, here are the winners for each category:

As we always try to help as many of our readers as possible, we have decided to publish our dedicated, ultimate Neewer nw700 review to help any of our readers who are considering adding the Neewer nw700 to their collection of camera accessories. On the flip side of that though, the microphone is also an excellent budget-friendly option for singers, musicians, podcasters, and pretty much anyone else who needs a solid little cardioid microphone that is budget-friendly. You’ll also notice that the NW 800 is only 15cm or so in length (where most condenser mics are a good 20cm plus in length), which tells you that the capsule inside is probably a compact electret style one. Microphone design: Bottom Line The mixer will have ports for the audio cables labeled and colored for you to know which cable goes where.

This voltage is an average of the signal envelope — but the peaks of the waveform are greater. Assuming the ratio between the signal peaks and the average is 10 dB, the peak signal level could reach: The biggest issue with the Neewer microphone is that users don’t understand the condenser microphone concept. That is all you need, and your microphone should be working correctly. If it does not work, there could be some faults with the connections, and you should change them.It feels reasonably solid, though you’ll certainly notice the difference if you compare it to say, an Audio-Technica AT2020 or a Rode NT1-A. You’ll also notice some pronounced low-frequency dips, particularly around 50-60Hz, which will help to remove low-frequency hums. Frequency response: Bottom Line The plug to XLR cable is a bit too tight. This makes it very difficult to easily connect and disconnect the cable You can then connect the mixer to your laptop or PC, and it should work perfectly. The choice of a microphone is a big deal, especially for professionals.