The Impaktor technology offers an above-average service life even under extreme circumstances thanks to the best possible utilisation of the material properties and the optimised geometry. Regular lubrication of axles and other movable parts helps the gears run smoothly, and it's a good idea to do this at least every 10,000 cycles.

Thanks to a light weight of 423g, this happy clamper is easily portable so you'll always have it to hand in the field. The PZ 6/5 Crimp Tool is suitable for crimping wire end ferrules with or without plastic collars and features a versatile five-profile crimping head. This ensures a secure fit in the screw head, reduces the contact pressure required and lowers the risk of slipping. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. BiTorsion bits with an elastic torsion zone - where kinetic energy is diverted from peak loads - and softer BiTorsion zone to prevent the bit tip from twisting under high strain.The multi-component Bit-Check is convincing on account of its low weight and the maximum possible degree of compactness. A compact and lightweight design, with a silicone outer sleeve, provides splash protection making it perfect for travelling. The "Take it easy" Bit-Checks have bits with a sleeve which - from its colour and size designation - make it simple to access the right bit quickly. The Wera 932/918/6 set of Chiseldrivers has been designed to be hit with a hammer, whilst remaining fully useable as a screwdriver, with impact cap and pound-thru hexagon blade.

The bit tip is coated with tiny diamond particles; this reduces the risk of any slipping out of the screw head thanks to the enhanced frictional resistance.Used throughout industry for the preparation of stranded conductors to be connected into a electrical termination such as a terminal block, ensuring a safe and permanent connection. The profile and size of the bits are easy to recognise thanks to the Wera "Take it easy" Tool Finder with its colour coding and clearly visible imprint. Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants. ZLT Electrical Limited was established in 2010 in Ashford, with intention of fully embracing the possibilities and technologies of online trading.